Announcement

Collapse
No announcement yet.

GS650G frame with GS650E engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS650G frame with GS650E engine

    Trying to figure out if an 650E engine will work on a 650G Frame


    I haven't started my oem motor but if it doesn't work I would like to know the answer to the above question


    Thanks for the help in advance
    Jijoy
    1982 Suzuki GS650GZ

    OEM Wiring Diagram: 81-82 GS650 Four Cylinders
    https://imgur.com/gallery/B8pdfN8

    #2
    Pretty sure it won't work. Shaft drive frame is dedicated.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      NOPE, the "E" chain dr. sprocket will not connect to the "G" driveshaft.
      1983 GS1100E, 1983 CB1100F, 1991 GSX1100G, 1996 Kaw. ZL600 Eliminator, 1999 Bandit 1200S, 2005 Bandit 1200S, 2000 Kaw. ZRX 1100

      Comment


        #4
        Thank you for the information I’m glad I asked
        Jijoy
        1982 Suzuki GS650GZ

        OEM Wiring Diagram: 81-82 GS650 Four Cylinders
        https://imgur.com/gallery/B8pdfN8

        Comment

        Working...
        X