Thanks in advance for any advice Keith.
Announcement
Collapse
No announcement yet.
Chain and sprockets
Collapse
X
-
Chain and sprockets
Hi everyone I'm restoring a 78 gs1000 EC on fitting a new EK630 chain and sprocket kit IV noticed the gearbox sprocket is thinner than the original which has rubber cushing pads built in torquing up the sprocket nut there's slot of sideways play on the new sprocket is this "ok safe normal" with after market sprockets?
Thanks in advance for any advice Keith.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35618
- Torrance, CA
You need a spacer, because the aftermarket sprocket is thinner than the original.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment