GS1000G Tacho oil leak help

[vodkalex]

Hi all, Just wanted to know how to remove the Tacho housing on the engine on my GS1000g as I have oil leaking down the cable.

[Agemax]

straight forward, just unscrew the cable, then remove the small mounting screw that holds it in, then pull it out. you can buy new seals to cure the leak

[vodkalex]

Thanks, yeah i tried that but it wouldnt budge, will keep trying

[Agemax]

Thanks, yeah i tried that but it wouldnt budge, will keep trying

a few taps with a mallet or a little persuasion with a screw driver may help.

[vodkalex]

Ah trusty mallet out you come!

[bwringer]

Instructions, with pictures and everything showing how I pry these out.

http://bwringer.com/gs/tachcableseals.html

[thicklotto]

oil leak

I replaced the oil seals as per the instructions and photos, but there is still oil on the outer cable.Any suggestions please

[thicklotto]

tacho leak

Answering my own question here. I reckon oil is running down the cable from the actual tachometer ? All very strange

[Larry D]

No oil should be in the tach itself.....You didn't nick one of the seals when you re-installed them did you ??...and you have it all seated well ??