Announcement

Collapse
No announcement yet.

fully synthetic oil.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    fully synthetic oil.

    Had to put new oil in my 1983 GS750T the other day,( dropped a side casing off to repair a gasket) but only oil I had was 5w40 fully synthetic.

    I know its supposed to have 10w40 oil but its what I had available. I have been told by my bro that fully synthetic oil is not good for wet clutches, and that I need to get it out and clean the clutch plates etc.

    Is there any truth to this? what sort of damage could it do/already have done? Or will it be ok till I can afford to buy some better oil. The oil i put in was new and clean.

    thanks for you time and help.

    Mac.

    #2
    As long as it doesn't say energy conserving on the bottle it will be fine. I've got rotella 5w-40 synthetic in my bike right now. I also run the 5w-40 in my diesel car, great stuff.

    Comment


      #3
      Without getting into an argument about the pros and cons of fully synthetic... my understanding of the issues surrounding clutches and oil have more to do with the additives than the oil itself - some "anti-fillintheblank" "(generic) wearguard", "molysuperantisliphitechand****e" gunk can actually affect the way the fibers and steels behave - causing slip.

      That said, I am a newbie to all this... don't take my word as gospel.

      Regarding the "5W vs. 10W" - that low number is about low temp viscosity. I'm not sure if it would mean anything to your motor once it warmed up.

      Comment


        #4
        Thanks for that brothers, I did think it a bit strange. Oil is oil is oil, as long as it's loobing up the bits it needs to, then it should be ok.

        Many thanks for the rapid replies.

        Mac.

        Comment


          #5
          Originally posted by macthenoo View Post
          Thanks for that brothers, I did think it a bit strange. Oil is oil is oil, as long as it's loobing up the bits it needs to, then it should be ok.

          Many thanks for the rapid replies.

          Mac.
          Oil is not oil, but 5W-40 synthetic is fine, even preferred, over 10W-40 dino oil as long as it doesn't have a bunch of "energy conserving" additives.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment


            #6
            checked the bottle and it has no energy conserving shi* in it.

            Happy days.

            Mac.

            Comment


              #7
              Rotella 5W-40 syn is now marked "MA", meaning it's Officially suitable for motorcycles with wet clutches. So there.

              I've been using it for a couple of years in all my bikes. Good stuff!
              1983 GS850G, Cosmos Blue.
              2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
              2015 Yamaha FJ-09, Magma Red Power Corrupts...
              Eat more venison.

              Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

              Celeriter equita, converteque saepe.

              SUPPORT THIS SITE! DONATE TODAY!

              Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!

              Comment

              Working...
              X