Announcement

Collapse
No announcement yet.

clutch questions.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    clutch questions.

    this is on my 1981 gs450L. 1) should the rod/bar ( i don't know the name. it's the rod/bar that the cable hooks up to and goes into the crankase. and from the diagrams i am seeing. it runs thru the clutch.) should this piece move in and out? about an inch or so? 2) would this cause my shifting to be rough or should i look more into it. thanks in advance.

    #2
    Not sure about the movement on the rod. But winter project 81 450 was doing similar. I replaced clutch springs and cleaned metal clutch plates, put on new cable, and adjusted screw inside egg shaped cover held in by two screws on the frt. clutch cover. Now it shift up and down pretty well, although still haven't gotten to ride it yet. terrylee.

    Comment

    Working...
    X