Clutch Nut

[Guest]

My '83 GS1100ES has a vibration at idle which I assuming is an indication of the clutch housing center nut being too loose.

Does anyone have the torque spec for tightening?

thanks

[bellucci]

Most of the members say that you should replace that with an APE hd nut... The threads stretch and won't hold torque on the factory one... or so I have been told...
Curt

[SqDancerLynn1]

The 1150 nut is supposed to be better ?? How does it run? Try syncing the carbs first
Not sure on the torque But would say 75-80 ft lbs

[Nessism]

The 1150 nut is supposed to be better ?? How does it run? Try syncing the carbs first
Not sure on the torque But would say 75-80 ft lbs

Service manual has the spec. I think it's in the 50 ft-lbs range.

[legaleli]

My '83 GS1100ES has a vibration at idle which I assuming is an indication of the clutch housing center nut being too loose.

Does anyone have the torque spec for tightening?

thanks

Gold Hat: Hola, senor. We are Federales. You know, the mounted police.
Dobbs: If you're the police, where are your ape nuts?
Gold Hat: Ape nuts? We ain't got no ape nuts! We don't need no ape nuts. I don't have to show you any stinkin' ape nuts!