Announcement
Collapse
No announcement yet.
GS1000 Engine Resonating?
Collapse
X
-
GS1000 Engine Resonating?
Anyone have experience with their GS engine resonating between 2000 - 2500 RPM? My GS1000 is resonating enough to vibrate the hell out of the GS1000S fairing which I removed and then found the resonating sound is still there? It "sounds" like it's emenating from the lower LT side of the engine near the Generator cover. I touched the cover while it's in the buzz zone and I do not feel anything vibrating . . . Carbs are synchedSteve
1979 GS1000E (45 Yrs), 1981 GPz550 (11 Yrs)Tags: None
-
Danjal
-
BassCliff
Hi,
Have you checked to be sure the rotor bolt has not come loose?
Thank you for your indulgence,
BassCliff
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35640
- Torrance, CA
Hey Steve,
While riding my 1000 the other day I took note of a resonance frequency at 2500 rpm like you mentioned. It wasn't noticeable to the point of being bothersome though. My old 850 had a similar issue and the steering lock post in the ignition switch assembly would vibrate annoyingly until I stuffed some grease in to damp the noise. I think it's an in line for cylinder engine thing but the magnitude varies.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment