.png "Powered by vBulletin")
Hello I started putting a GS 850 back to gether last summer and it has been sort of a pain because someone added something to the wire harness. My main problem now is that the pin that disengages the cluch isnt doing anythig. It moves back and forth easily and when the bike is in nutral I move the kick started and the tire moves a little. I have no idea what is wrong and is posting pictures helps out I would gladly do so.
-
-
Hi Mr. Raymond,
Here's a TON of information for you, including a couple of maintenance lists that are more or less mandatory to return your bike back to its original safe, reliable, bullet-proof condition.
Have you taken off the clutch cover to see what's going on in there? Stuck plates? Broken springs? You'll find manuals, guides, and tips on my website that may help. In the meantime, read on for your "mega-welcome". Let's get started.
I just stopped by to welcome you to the forum in my own, special way.
If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....
Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", the Carb Rebuild Series, and the Stator Papers. Now let me roll out the welcome mat for you...
Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!
Thanks for joining us. Keep us informed.
Thank you for your indulgence,
BassCliff
Comment