Announcement

Collapse
No announcement yet.

Flywheel Removing Tool Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    WTF
    you remove the center bolt.
    look in the hole.
    there are threads...YES
    screw correct bolt in the hole and impact the rotor off.
    20+ years of working on these shltters..
    i give correct info.
    ask around...
    1st you comment on the wrong puller for a bike that is not your model.
    now you want to tell me i'm wrong.
    PRE- 80 1000's CAN USE A BOLT TO PUSH THE ROTOR OFF!
    FACT!

    Comment


      #17
      ok, here is the tool i used. 35mm fly wheel puller for 8V gs1000.

      Comment


        #18
        i never said they didn't offer a puller for pre -80 1000's.
        that tool pushes against the loosened crank/rotor bolt.
        myself and others have used a bolt to push off rotor's many of times on these small tapered crank ends.
        have you asked yourself why suzuki threaded the rotor's center?
        thats to push the rotor off the crank.
        again..
        i'm not sure what your point is

        Comment

        Working...
        X