Announcement

Collapse
No announcement yet.

1150 rear wheel swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    1150 rear wheel swap

    I have swapped out the rear wheel on my 80 1100ET with an 1150. and have a question for someone else that has done it. I put a few spacers on the calipers and they line up nicely with the rotor, but I am not sure of the best spot to put spacers on the axle. I know there should be some, as the large nut turns in WAY to far. How thick does the spacer need to be?
    Some help/guidance here would sure be appreciated.


    Thanks!
    :::::::::::::::::::::::::::::::::::::::::::::
    Past:73' CL360, 74' CB450, 80' GS550,
    83' CB550SC, 78' CX500, 81' GL1100,
    85' GL1200LTD, 85' Honda Rebel
    84' GS1150, 92' GSX 1100G
    Current:
    80' GS1100E,,
    81 Yamaha XS1100,
    01' Bandit 1200
    sigpic
Working...
X