.png "Powered by vBulletin")
Hi guys. After replacing the clutch in my 850 i am experiencing problems with the gearbox. I can select 1st gear but cannot get the selector to select any higher gears. I haven't put the oil back in the engine yet only put the casing back over clutch and connected cable. Any idea what I might have done wrong. Thanks
-
-
You can't expect the bike to shift unless the engine is running and/or the rear wheel is turning; the engagement features in the transmission won't align. My guess is your transmission is just fine.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
If you'd like you can try to change gears while a friend rotates the rear wheel.Comment
-
Ok I'll try that but why wouldn't the bike go up into 2nd gear from neutral though? Thanks WayneComment
-
You can't expect the bike to shift unless the engine is running and/or the rear wheel is turning; the engagement features in the transmission won't align.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Right thanks for the info I'll stick somne oil in it and run it tomorrow. WayneComment
Comment