Intake boot o-rings

[Guest]

are these measured from the inside diameter, or the outside?

I am placing my order once I set up a paypal. I will take pics if necessary but dont feel like getting up right this second.


edit:I figured I might as wall get some pics while I waited


O.D. about 44mm



I.D. about 38mm

[Big T]

Just order them -either from your dealer, cyleorings.com or take the intake boot to the store to confirm

[bwringer]

O-rings are specified based on the ID.

So, 38mm.

Also, you'll notice that the Suzuki part number is:
09280-38004

http://www.partshark.com/fiche_section_detail.asp?section=94275&category=Motorcycles&make=SUZUKI&year=1981&fveh=2127

[JCSkokos]

alright thanks for the quick response.

[SqDancerLynn1]

What you should do is order the intake O rings and a set of carb O rings from
cycleorings.com

[JCSkokos]

What you should do is order the intake O rings and a set of carb O rings from
cycleorings.com

I just did this. well Im not sure which site it was, but it was the one where he has the stainless fasteners, and the deal where you get the drain plug o-rings for a penny

[DanTheMan]

I just did this. well Im not sure which site it was, but it was the one where he has the stainless fasteners, and the deal where you get the drain plug o-rings for a penny

Bingo, that was cycleorings.com, Robert Barr's site. The best place to get them.

[JCSkokos]

sweet. now I just gotta entertain myself for a week until all my orders come in. lol