Dowel Pins

[Guest]

Hi,
Can anyone tell me how many dowel pins are between the crankcase and block on a 78 GS1000? And which holes they go into? My rebuild has been delayed and I didn't take a photo that shows that info. Nor is it exactly clear from the parts fiche.
Thanks!
Lyle

[Suzuki_Don]

There are two 13mm dowels and they go over the two front outside cylinder studs. It should be obvious because there is only one place they will fit, the stud holes are relieved out to 13mm to accept them. You will see what I mean when you have a look at the top of the crankcase and the underneath side of the cylinders.

[SDBuckeye]

Thanks Don! Don't go to far away, I may be back with more questions later....

Cheers,
Lyle

[Suzuki_Don]

Thanks Don! Don't go to far away, I may be back with more questions later....

Cheers,
Lyle

FIRE AWAY Lyle.