Help removing tach assembly

[jyck]

I'm trying to replace my seals per Brian's walkthrough, but can't seem to get the tach assembly off. I've had it soaked in PB blaster for about an hour and it isn't moving.

Any tips or tricks on how to remove this?

[BassCliff]

Hi,

Be patient and keep using the PB Blaster. This is how I got mine apart; Tap it with a hammer and gently pry with a large flat screwdriver or similar. Pry a little from a few different directions. Use a little piece of wood or plastic so that you don't dent the valve cover or other sensitive aluminum parts.




Thank you for your indulgence,

BassCliff

[Big T]

Try to rotate it a bit, is what BC is saying

[jyck]

Ah, the ol' "patience" trick. Got it off. Thanks, guys.