Announcement

Collapse
No announcement yet.

Need info about idler gear shims GS1100

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need info about idler gear shims GS1100

    The two shims that sit in front and behind the starter idler gear, I've somehow stupidly managed to lose them.
    Can somebody please measure one for me so I can get a couple made?
    Internal diameter, outside diameter and thickness please
    thanks.

    #2
    They work fine without the shims, just so you know. Ray.

    Comment


      #3
      They are just spacers to keep the teeth of the gears away from the cases.

      As rapidray says, they work fine without, but adding thin washers won't hurt, either.

      .
      sigpic
      mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
      hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
      #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
      #2 son: 1980 GS1000G
      Family Portrait
      Siblings and Spouses
      Mom's first ride
      Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
      (Click on my username in the upper-left corner for e-mail info.)

      Comment


        #4
        I appreciate what you're both saying. I know it will work ok without them, and I know the idler only spins when the starter is operating, but I wanna replace them anyway. Just need the sizes so I can get them made up quick....

        Comment


          #5
          Anyone know?

          Comment


            #6
            Surely you can but some......

            WASHER 09160-13003 $1.23

            Comment


              #7
              Originally posted by sharpy View Post
              Surely you can but some......

              WASHER 09160-13003 $1.23





              Googled the part number and got the dimensions.Thank you.

              09160-13003 - WASHER (13.3X25X0.85)

              Comment

              Working...
              X