Checking transmission operations, on the bench!

[rvnkvn]

Is there anyway to diagnose trans problems while the engine is out of the bike?

I don't know if i have a problem or not but here is what's happening.

If you turn the counter shaft in neutral nothing happens. Every things spins freely. When you put it in gear,I use 5th gear cause it's easier to turn by hand, the shaft that goes to the clutch basket it turns, but maybe a quarter of a turn at a time. Naturally, it would turn more if you could turn it by hand in 1st gear, but its tough to do holding on to the sprocket.

Is this a normal operation? Do I need to re-split the cases and look to see if I assembled incorrectly?

Thanks for the help!!