Announcement

Collapse
No announcement yet.

GS shaftie driveshaft flange torque

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS shaftie driveshaft flange torque

    Pardon my ignorance, but I've been all through all the manuals I have available to me and I can't find the torque setting for driveshaft flange bolts on my 850G.

    These are the bolts that have the 9 on the end, flange hex capscrew, with a small shoulder.

    Planning to use blue locktite on them as well.

    #2
    According to the GS850 manual on Cliff's web site, under service specifications in the Torque Table section, the 8mm housing bolts are to be torqued to 14.5 to 19 ft/lb, if those are the ones you mean. It is very near the front of the manual.
    sigpic Too old, too many bikes, too many cars, too many things

    Comment

    Working...
    X