.png "Powered by vBulletin")
Has anyone recently measured the nominal diameter and thread pitch of a GS1100 clutch hub nut? Judging by the alpha sports part no. its probably 24mm. but fine (2mm) or coarse (3mm) thread?
I'm in the process of (slowly) assembling all the upgrade parts necessary for my clutch. unfortunately the postal strike up here in Ca has put a kink in my plans. I'm trying to source as many parts locally as possible and the next item up is the hub nut. I can get class 8 and 10, M24x3.0mm nuts locally (they'll be a bit wider than the stock nut but i dont anticipate that being a problem) but i dont want to tear into the bike and then not have all the necessary parts to reassemble it so i was hoping someone could confirm the size.
-Zander
I'm in the process of (slowly) assembling all the upgrade parts necessary for my clutch. unfortunately the postal strike up here in Ca has put a kink in my plans. I'm trying to source as many parts locally as possible and the next item up is the hub nut. I can get class 8 and 10, M24x3.0mm nuts locally (they'll be a bit wider than the stock nut but i dont anticipate that being a problem) but i dont want to tear into the bike and then not have all the necessary parts to reassemble it so i was hoping someone could confirm the size.
-Zander
Comment