How to fit an Oil Cooler???

[Seana23]

Yeah, good point Guy. Dint think ov dat!!
Ill ask your man John the Breaker there.
Thanx babes.
Xxx

[koolaid_kid]

I know the current focus is on the adapter plate, but you should also be investigating the cooler itself. You can make the lines with Earl's connections and stainless lines, but the size and fitting of the cooler will also be a challenge.
Just a thought.

[Seana23]

Thanx KK. the oil cooler is approx 10 inches by 3 inches by 4 inches... I'm hoping fo fit it at Handlebar hight, where the Clocks usually go. Mounting tje Speedo at the top left ov the engine and the Taacho on t'other side... She's a bit ov a Mutant, my bike.

Thing is, that the cooler still has 3 inches ov the original rubberised pipe each side ov it as i cant undo the connecting bolts so ill have to join some Goodridge to the rubber pipes... Is this possible?

XXX

[koolaid_kid]

Honestly, I suggest you do not want to mount the cooler there. You want it frame mounted so it, and the lines feeding it, do not move.