Clutch on '82 GS550MZ

[gregr]

The clutch on my 82-550MZ would not engage until the lever was out at least halfway. I was advised that this was due to worn fiber clutch plates. So, I replaced them with new Suzuki OEM plates. It may have slightly improved but still way too muck travel before engagement. Any suggestions?
Thanks in advance

[Nessism]

Try adjusting the cable, there is too much slack. Regarding the clutch fiber plate wear, measuring the plates will tell you if they are worn or okay. All this info and more in the factory Suzuki service manual. Basscliff has a free download if you don't already have it.

[gregr]

I forgot to mention that the cable is properly adjusted with about 1/8" freeplay. Still has long release arc.

[hampshirehog]

Have you adjusted the clutch lifting mechanism down on the engine?

[Nessism]

One other thing that could be a factor is if the clutch basket has deep grooves where the plates are hanging up. If this is the case the clutch may engage abruptly all at once.

[gregr]

Have you adjusted the clutch lifting mechanism down on the engine?

No I have not. Will get manual and do so.
Thanks

[gregr]

One other thing that could be a factor is if the clutch basket has deep grooves where the plates are hanging up. If this is the case the clutch may engage abruptly all at once.

No grooves on basket. That looked very good.
Thanks

[Nessism]

This thread might help you learn how to adjust your clutch... http://www.thegsresources.com/_forum...d.php?t=180972