Front Engine Bolt

[Guest]

Anybody have issues with the front engine bolt

I just took off the crash bars so I needed a new bolt, got the right part from Suzuki but it is too long, the nut runs out of thread before getting close to tight

I looked on my other Kat but there is no spacer

Is it just that I have the wrong part or am I am missing something?

[hampshirehog]

If you have got the washers fitted and it won't tighten you have the wrong bolt. Should measure 10 X 250

[Agemax]

yep, washers and spring washers. how much too long is it? maybe double up on the flat washers so it clamps up, saves buying another one, or get the threads tapped a bit longer maybe

[English Bulldog]

The bolt is 10 x 250, but off the 1000 it is 10 x 235
The spacing between the front frame brackets is the same on both the 1100 and the 1000

Guess I'm going to be looking for a spacer to make this one work, 15mm of washers is going to look like crap

[Agemax]

The bolt is 10 x 250, but off the 1000 it is 10 x 235
The spacing between the front frame brackets is the same on both the 1100 and the 1000

Guess I'm going to be looking for a spacer to make this one work, 15mm of washers is going to look like crap

retap it and cut a bit off the end