.png "Powered by vBulletin")
....part number 25 from the clutch cover? Tap it out from the bottom?
-
-
Down from the top..I dont think the worm gear will fit thru the hole in the cover. You can try upwards. After relooking at the pic, that may be the way to get the shaft bearing out of the well as well. Ive never removed one myself.Last edited by chuck hahn; 02-10-2012, 01:39 PM.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
And the answer is.....
Tap it out from the bottom with a center punch.
So Chuck, your second guess was correct. Thanks for playing!Comment
-
Yes..after relooking at the diagram..i thought there must be a shoulder in the cover that the bearing would have to seat against.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Learn something everyday.Comment
Comment