Drive hub screwed or normal

[Dart94]

Hey guys I think I already know the answer to this but... is this normal?

[Dart94]

to kind of add some detail to the picture, the teeth are really thin on most and than thick right at the end of the tooth. Kind of like a wedge. I have a feeling I need a new one. Anyone know where to find one?

[7981GS]

That one is pretty bad. Did it move at all?
I probably have one if no one else wants to help.
Where are you located and which model G?

Eric

[Nessism]

That final drive looks done for. Some Honda Moly 60 grease would have helped.

Ebay has tons of final drive units for cheap. All the 850/1000/1100 units are the same other than the '83+ 1100 units have a taller ratio.

Good luck

[Dart94]

go figure Ness. Its out of a 1984 GS1100 GK... So am I not able to use an older final? And yah it still moved. I only took it out for a ride around the block last year before I started to tear it apart.

[Nessism]

Yes, you can use an older unit, including one from an 850.

[Dart94]

ok cool. Just be a bit of a higher RPM at cruise I take it eh. Atleast the spline is in not bad condition.