.png "Powered by vBulletin")
Simple question-Are intake and exhaust valve guides the same?
So I need 16 for my 4 valve per cylinder 82' 750?
So I need 16 for my 4 valve per cylinder 82' 750?
-
-
No, not the same.
Look at the part fishe and see for yourself...http://www.alpha-sports.com/suzuki_parts.htm
Oh, and are you sure they need to be replaced?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
The originals were different part #'s. The replacement ones are the sameOriginally posted by Nessism View Post
I have a set of 16 nos ones you can have for $50 plus ship.
Comment
-
Sounds good gearhead13. PM for details.
Thanks.
BigRockComment
-
I've changed the oil seals and lapped the valves. Still getting blue smoke and more smoke on deceleration. No smoke with engine cold.
42k+miles. I don't have dial meter, valves do move a bit pulled out 3/4 inch.
I'm open to suggestions.
Rings and gaskets recently changed with deglazing.
Compression 145-150 all cylinders.
What else is there to do?Comment
Comment