Announcement

Collapse
No announcement yet.

oil pressure switch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    oil pressure switch

    Ello

    79 gs850g


    After reading numerous threads pertaining to various oil leaks , I decided to tackle mine , starting with the oil pressure switch. After getting it removed , I saw the diamond shaped o-ring was in pretty sad shape. I called my local suzuki dealer and ordered a new one.
    After cleaning it up real good , i used some hi-temp gasket maker in conjunction with the old o-ring and reinstalled the switch.
    Went for about a 5 mile ride just to see if any leakage occured or vanished . Now upon pulling into the driveway , once i placed the kickstand down and leaned over the bike , oil came flowing from the switch. And it was alot of oil . I immediately put bike on centerstand and the leak stoppped.
    This morning i went fer another little ride to get it warm and the same thing happened once i leaned the bike into the kickstand.


    If anyone has any insight to what might be going on , I would love to hear it. After work today Im yanking that switch back out to have another look . Seems weird that so much oil would leak like that when its never been a problem before. except for a little oil on the side fins which im working on
    taking care of.


    Graf

    #2
    Re;

    One thing I failed to mention......

    When the bike is good and warm { ridden for 10 or so miles } immediately after i shut down , you can hear a bubbling sound. almost like boiling water. This lasts for maybe 20 seconds or less. Im not quite sure if its the engine oil or if its the bevel drive oil. most noticeable on left side of bike as on sits on it.



    Graf

    Comment


      #3
      The two screws that hold sender housing down- do they have special sealing washers on them?

      Edit; have you checked flatness of housing to make sure it didn't get distorted at some point?
      Last edited by tom203; 05-31-2012, 03:46 PM. Reason: info
      1981 gs650L

      "We are all born ignorant, but you have to work hard to stay stupid" Ben Franklin

      Comment


        #4
        the 2 bolts had washers on them ,,, Perhaps I overtightend them . Im pulling it back off in a minute... whats difference between sealing washers and reg washers?

        Comment


          #5
          Is there a puddle of oil on top of the engine that's running off when you put the bike on the side stand?

          I advise you to NOT ride the bike until you get the new seals.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment

          Working...
          X