.png "Powered by vBulletin")
i have to replace my base gasket after rebuilding the whole top end, evidently i messed the gasket up some how, but it has new rings and has broken in great, but because i have to pull the cylinders do i have to redo the rings again, or can i out it back together since the rings are brand new.
-
-
You don't have to change the rings. I am assuming your tearing it back down due to oil leak at base? You will need a new head gasket, top and base.Last edited by Guest; 06-15-2012, 08:10 PM. -
Just a reminder to use OE Suzuki gaskets, and don't forget to retorque the cylinder head after a few heat cycles to avoid leaks.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
Originally posted by Nessism View Post
Or you can tear it down again for the third time. Don't ask me how I know.
Good practice.Comment
-
Ditto on OEM gaskets and don't forget to re-torque after a few hundred miles.Comment
Comment