Announcement
Collapse
No announcement yet.
Is this Oil Cooler Factory ?
Collapse
X
-
Is this Oil Cooler Factory ?
Is this oil cooler something the previous owner installed or was it factory back in 82?
Tags: None
-
Aftermarket.
Derale/lockhart cooler and filter cover plate
Nic83 GS1100ES rebuild:
http://www.thegsresources.com/_forum...d.php?t=170032
Budget GSXR Conversion:
http://www.thegsresources.com/_forum...d.php?t=200563
New to me bike: 2008 B-KING
-
Yup that's a Derale.
They work ok but you have to keep an eye on those rubber hoses. To say heat can be an issue is an understatement.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
MMM Nice rubber hoses right near toasty exhaust pipes.NO PIC THANKS TO FOTO BUCKET FOR BEING RIDICULOUS
Current Rides: 1980 Suzuki GS1000ET, 2009 Yamaha FZ1, 1983 Honda CB1100F, 2006 H-D Fatboy
Previous Rides: 1972 Yamaha DS7, 1977 Yamaha RD400D, '79 RD400F Daytona Special, '82 RD350LC, 1980 Suzuki GS1000E (sold that one), 1982 Honda CB900F, 1984 Kawasaki GPZ900R
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35602
- Torrance, CA
Fuel line feeding an oil cooler?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
evh
thanks for all the replies.. Well I did inspect the hoses and they look fine.. Do you guys think the oil cooler is not necessary? After I did an oil change I warmed it up and took it for a ride, does that thing every pull strong.. LOL I was surprised.. I did notice the engine was very hot to touch which is normal for a 4 stroke air cooled... I have to get my oil temp gauge working so I can see the temps...
Comment
-
Gonzo
These engines were designed to run that kind of heat without a cooler. I think a cooler is a bit overkill unless you are running these things super hard. You might need that gauge to make sure your oil doesn't get too cool in the colder months as long as it is on there.
Comment
-
koolaid_kid
I would keep it, but make stainless steel lines to replace the rubber hoses.
Cooler is not required, but not a bad thing. I put one on my GS and the temps dropped 80-100 F.
You can also cover it during the winter months (watch 18 wheelers).
Comment
-
I don't run one. Firstly, it can block airflow to the engine if placed poorly and second, as stated before, these engines were designed to run without a cooler. Just change the oil every 2000 miles as called for.NO PIC THANKS TO FOTO BUCKET FOR BEING RIDICULOUS
Current Rides: 1980 Suzuki GS1000ET, 2009 Yamaha FZ1, 1983 Honda CB1100F, 2006 H-D Fatboy
Previous Rides: 1972 Yamaha DS7, 1977 Yamaha RD400D, '79 RD400F Daytona Special, '82 RD350LC, 1980 Suzuki GS1000E (sold that one), 1982 Honda CB900F, 1984 Kawasaki GPZ900R
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35602
- Torrance, CA
Suzuki added oil coolers on most of the later generation GS's so I think they felt the oil temps were too high under some situations. Of course, these bikes have a thermostat built into the system too. Personally, I think they are a good idea, but mostly in really hot weather, and mostly when traffic slows down and there isn't much air flowing over the engine. If you add one I suggest working out how to add a thermostat to the system.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
Comment