Announcement

Collapse
No announcement yet.

Cams/Shims - no gap - double checking procedure

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Those may be the originals. No surprise there is no gap

    Comment


      #17
      Since this last posting Steve has generosly given of his spreadsheet and time in helping me figure out which shims to order.

      I had a couple that I found were ok after Re-Measuring the gap. (I may have had some feelers stuck together, cleaned the oil off with carb cleaner and WALA good results)
      82 gs1100e FAUX Skunk
      80 gs1000s

      Comment

      Working...
      X