thanx james
Announcement
Collapse
No announcement yet.
oil cooler....
Collapse
X
-
RigRoller
oil cooler....
So i just found out the oil cooler is not oem on my 82 mz.....so how much extra oil should i put in it....ya noob question...lol... rite now im at like 2 3/4 quarts lucas 10/40....should u i add like a another 1/2 qrt ???so the oil sight glass is like 3/4 full im between f and L....
thanx jamesTags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35641
- Torrance, CA
You need a whole lot more oil than 2 3/4 quarts. Check your service manual for the oil level, then add another 1/3 of a quart or so for the cooler.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
Make sure it is always at the top of the site window at minimum.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
GS1100ez
when i added my cooler
i started it up
let it prime the cooler
added oil to the middle of the sight glass
started it up
let it run a few min
checked it
added if needed to sight wglass
drove it a few miles to really get it pumping and all the air out
and checked it again and adjusted accordingly
when its cold the sight will be filled due to the cooler draining down
Comment
Comment