.png "Powered by vBulletin")
Just a quick question guys, looking to swop across to a 530 conversion on my 79 GS1000E, can you tell me if the front sprocket retaining nut is left or right hand threads, it sure is mighty tight. I have been trying to loosen in an anti clockwise direction.
-
-
Normal right hand thread . Try an air impact it will come off.1984 GS1100GK newest addition to the heard
80 GS 1000gt- most favorite ride love this bike
1978 GS1000E- Known as "RoadKill" , Finished
83 gs750ed- first new purchase
85 EX500- vintage track weapon
1958Ducati 98 Tourismo
“Remember When in doubt use full throttle, It may not improve the situation ,but it will end the suspense ,
If it isn't going to make it faster or safer it isn't worth doing -
have some one stand on the rear brake and put the bike in 3rd or 4th gear. use a piece of scaffold pole or similar on the end of your socket bar for extra leverage. it will be tight but it will come off. make sure you flatten out the locking tab washer before attempting!1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!Comment
-
Cheers Adrian and hjfisk
Comment
Comment