Announcement
Collapse
No announcement yet.
First start up after top end rebuild
Collapse
X
-
First start up after top end rebuild
Hey all. I've rebuilt the top end of my 80 1000G and it looks like I'm ready to start it up. I'm just wondering what I have to do if anything in regards to oil before the first start up? a bit of oil down the cylinders? around the cams? I did hit the starter button for a second to make sure the starter worked and it cranked but slowly like the battery was half juiced, but it was fully charged. Thanks in advance.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533Tags: None
-
Costing me?? not sure what you mean but I did all the work myself and bought the parts from Boulevard Suzuki 2 yrs ago when they had an "OMG you're fired for putting the sale prices that low" sale.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
Shwartz
Originally posted by azr View PostCosting me?? not sure what you mean but I did all the work myself and bought the parts from Boulevard Suzuki 2 yrs ago when they had an "OMG you're fired for putting the sale prices that low" sale.
Comment
-
um no, I was actually keeping my finger's crossed for this years sale but nope, nothing. Kinda figured that though. Anyways, my engine oil light is not coming on, bulbs fine, I'll have to sort that out at another time though. Filled her up with oil but she still not starting. She's turning over but slowly, as though the pistons are tight. I took out the plugs and she moved faster but I can't get her to fire up. Another problem is that I can't get the clutch to engage. The gear shift won't move. The bike rolls like it is in neutral but no neutral light comes on (which is weird because it did before but again that may just be a connect). Arrrrrrrr......it's never easy. I thought maybe I had put the clutch cover on without having the teeth engaged properly but I took it apart and it sure looks like everything is meshing together fine. I've hooked up the clutch cable and it 'feels' like the clutch is working (it's stiffer than I thought it would be) but I can not move the gear shifter. I'm not sure if I screwed something up while putting the final gear assembly together (which I don't think I could have as it's pretty straight forward) or if I'm doing something wrong with the clutch. Any thoughts?Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
GateKeeper
roll the bike a bit as your trying to get into gear, sometimes your sitting tooth on tooth and it just won't go in....a bit of movement might allow the teeth to move a bit and allow them to engage properly
if bike is on a stand try rotating the rear tire, so long as the chain is connected...
.
Comment
-
1st thought is DO NOT START IT UNLESS YOU ARE SURE YOU HAVE OIL PRESSURE!.
the gear shift sounds like you have not engaged the change mechanism correctly.
you can see it behind the clutch on the left. the 2 quadrants have to be central together and the spring has to be either side of the locating post1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!
Comment
-
Originally posted by Agemax View Post1st thought is DO NOT START IT UNLESS YOU ARE SURE YOU HAVE OIL PRESSURE!.
the gear shift sounds like you have not engaged the change mechanism correctly.
you can see it behind the clutch on the left. the 2 quadrants have to be central together and the spring has to be either side of the locating postRob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
you need to check if your oil pressure light switch is working ok.take the wire off the switch and ground it to earth (touching it on the engine will do). the oil light should come on. if it doesn't then you have a wiring problem. if it does then the switch could be faulty. a good clean may help it if its a bit sticky!.
you can fit an oil pressure gauge on the end of the crankcase oil gallery to check pressure for sure but it needs to be a very low pressure gauge as the pressure is only a few psi.1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!
Comment
-
Originally posted by Agemax View Postyou need to check if your oil pressure light switch is working ok.take the wire off the switch and ground it to earth (touching it on the engine will do). the oil light should come on. if it doesn't then you have a wiring problem. if it does then the switch could be faulty. a good clean may help it if its a bit sticky!.
you can fit an oil pressure gauge on the end of the crankcase oil gallery to check pressure for sure but it needs to be a very low pressure gauge as the pressure is only a few psi.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35598
- Torrance, CA
The oil pump is fine. I wouldn't give it another thought if the bike was running before the top end job, and you didn't mess with the clutch basket. The pump is gear driven and almost foolproof.
Did you double check your cam timing? It's easy to get the cams 180* out of time.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Ok, the oil sensor is working now. Needed a better cleaning than the one I had initially given it 'I guess', anyways the red light is working now, on when key on goes out when turning over, as well the light comes on anytime I ground the wire or when I had the oil sensor out and hooked the wire to it and then grounded the sensor. I did hook up an oil gauge that was marked for a Honda GL1000 but it goes up to 180 on the dial, didn't register anything but when I took it back out I realized there was no oil there. So I left the hole open and turned it over a few times and oil finally started coming out. I buttoned up the hole and filled up my oil again as it had gone down 3/4-1 litre, so I'm guessing oil finally got up to the cams. Soo...I pulled off the clutch cover and you were bang on, the change mechanism is not engaging the teeth, must have been knocked out during the whole rebuild. Is there any way to get it to mesh back in with the gears without taking off the clutch basket? I've been trying with no luck yet....getting there. Ed, good question about the cams, it was awhile back now but I do remember following the manual to a 'T' and double checking but once I get the clutch issue sorted if it still does not fire I'll be checking that out, thanks the heads up.Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533
Comment
Comment