Motorcycle crankcase breather tanks.

[dorkburger]

Thats a sweet little item. I may be the biggest hack here. i piped mine out to the end of my yoshi exhaust can in 3/8 copper tubing, angled it into the exhaust stream , and thru venturi effect, a small vacuum (I measured around 1'' negative if i recall) is drawn on the crankcase.

[Agemax]

i have an order for 1 of these now,thanks Normand. i am selling them for £15GBP +shipping if anyone is interested

[salty_monk]

I'll probably take one if I can figure out the fitting... need to have a measure up. You can ship to Kent & I'll pick it up next time I'm over.

[Agemax]

I'll probably take one if I can figure out the fitting... need to have a measure up. You can ship to Kent & I'll pick it up next time I'm over.

let me know when you decide where you want to mount it and i can make it to suit if thats any help

[quexpress]

i have an order for 1 of these now,thanks Normand. i am selling them for £15GBP +shipping if anyone is interested

No ... thank YOU Adrian!

[Grundoon]

I think I used two Power Brake Booster Check Valves on my Yamaha XS650 Special. Any auto parts store has them cheap, but they aren't as good looking as this.

[salty_monk]

let me know when you decide where you want to mount it and i can make it to suit if thats any help

I'm 99% sure it will be from that tab or a bar spanning both tabs. With the battery in place I don't have a lot of other space for it.

Have you thought about adding two windows? One to shine the torch through & the other to see the level? (That's what I have to do with the coolant tank on my KLR to see the level in it, shine a torch from the side to see the level at the front so I assume this might be similar).

I have a feeling I'll need one in horizontal configuration with the bracket on the top & one inlet. Where does your second breather pipe come from? A fitting on the oil filler?

[Agemax]

I'm 99% sure it will be from that tab or a bar spanning both tabs. With the battery in place I don't have a lot of other space for it.

would a vertical one fit anywhere better? as i have no battery where the stock one fits now i cannot see how much space you have.

[quexpress]

The postman left a package

Youppee!!! Your breather tank looks great Adrian!
I'll certainly need to pay attention while installing it in order not to scratch it, etc.

Thanks a lot! Much appreciated sir!

[quexpress]

Side pic

[Agemax]

Youppee!!! Your breather tank looks great Adrian!
I'll certainly need to pay attention while installing it in order not to scratch it, etc.

Thanks a lot! Much appreciated sir!

thanks Normand, glad you like it.
i dont remember sending those sweets in the box as well!!!!!

[Starion007]

Hello Agemax, looks nice. May I suggest other outlets? Go cart racers, dragracers all use these and most are soda bottles and zip ties.
Your looks top notch!!

[Agemax]

Hello Agemax, looks nice. May I suggest other outlets? Go cart racers, dragracers all use these and most are soda bottles and zip ties.
Your looks top notch!!

thanks, yes thats a good idea. i may put a few up on ebay in various categories, see what response i get.

[pete]

Man I missed this thread completely! If I didn't get one from Pegasus Racing a while back I'd be on it like a fly on... well... you know... nice work mate

[madjack57754]

I built mine out of aluminum water bottles. Pick them up at the dollar store and used bicycle bottle holder to mount them. Vent through an ebay k&n knock off.
Sorry no pictures avaliable where I'm at right now.