Announcement

Collapse
No announcement yet.

82 1100 g/k questions

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    82 1100 g/k questions

    Bike seems to be well maintained.
    I am inquiring of the drivetrain. my utmost concern for safety.
    Is it normal for a shaft to have some whine when letting off the throttle?
    I drained and changed all fluids. oils were clean in the primary and secondary, engine oil dark.
    After changing engine oil at low rpm I here a weird noise from the bottom of the engine, thinking starter clutch as it made a funny noise when starting it tonight.
    I plan on taking everything apart, maybe backlash has to be adjusted as it has 40k on it. and check that ring thing in the rear wheel I have seen pics of. IDK
    Other than that with these fat loud exhaust pipes I am going to check it has larger jets to compensate. Maybe even dyno needles. it is an aftermarket, no crossover pipe.
    And of course the valve shim clearances due to mileage even tho it runs great and warms up quick, I want to know all these thing for sure myself. I like my vehicles tip top and perfect as I can get them.
    What concerns me the most is the whining I hear on deceleration. as I have never owned a shafty before but I am loving the smoothness of this bike and the already installed progressives in the rear.
    I get handlebar wobble at 30 mph so maybe head bearings are in order also? may as well do wheel bearings too eh?
    Tags: None
    #2
    Yes pull your rear wheel and check the spline in the wheel. Being an 82 it probably still has the soft gold one it it. There is a new Black one listed on e-bay right now for 59. bucks well worth getting. Get some Honda moly 60 grease and lube it up before reassembly.
    1984 GS1100GK newest addition to the heard
    80 GS 1000gt- most favorite ride love this bike
    1978 GS1000E- Known as "RoadKill" , Finished
    83 gs750ed- first new purchase
    85 EX500- vintage track weapon
    1958Ducati 98 Tourismo
    “Remember When in doubt use full throttle, It may not improve the situation ,but it will end the suspense ,
    If it isn't going to make it faster or safer it isn't worth doing

    Comment

      #3
      dang 59 bux is cheap, u have the link? Not finding it, only 1 and it's 100 bux.
      not liking the new ebay search. it sux
      Last edited by Guest; 03-26-2013, 10:45 PM.

      Comment

        #4
        I'm looking for the 59. dollar one but here is a 99. one I'll keep looking;
        Error Page | eBay
        http://www.ebay.com/itm/SUZUKI-Final-Drive-Flange-NEW-64680-45113-Rear-Spline-GS1000-GS1100-VZ800-VL800-/121083281565?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D6529001990748748306%26pid%3D100033%26prg%3D1011%26rk%3D1%26sd%3D121083281565%26

        Well not having very good luck unless some one already grabbed it. It was a good deal . I would have bought it but I already have a couple spares.If you want to keep looking I see it tonight and I was looking at GS1000 parts when I ran across it.
        1984 GS1100GK newest addition to the heard
        80 GS 1000gt- most favorite ride love this bike
        1978 GS1000E- Known as "RoadKill" , Finished
        83 gs750ed- first new purchase
        85 EX500- vintage track weapon
        1958Ducati 98 Tourismo
        “Remember When in doubt use full throttle, It may not improve the situation ,but it will end the suspense ,
        If it isn't going to make it faster or safer it isn't worth doing

        Comment

          #5
          who knows mine may have been replaced already , we'll see soon enough when I get her apart and look.

          Comment

            #6
            so no replies as to if the whining is normal on deceleration on a shafty?
            and what it may be?
            Where is Steve?lol

            Comment

              #7
              Don't know about Suzukis yet as my GS1000G is still in pieces, but my GL1000 makes no noise on the overrun. I would expect the same from the Suzuki. My guess would be ring and pinion clearance is not setup correctly causing the noise. If your splines look good that would be where I would look. Rear drive boxes are cheap on Ebay, just replace it.

              Comment

                #8
                sounds more like transmission are is where the noise comes from.40k on it I bet it has never been reshimed, kinda scared about getting into this

                Comment

                Previous template Next
                Working...
                X