Announcement

Collapse
No announcement yet.

Checking oil level

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Checking oil level

    How long after you run the bike should the oil make it's way back down in the crankcase window area? Minutes? Hours?

    Seems like mine takes FOREVER....

    I am planning a moderately long trip tomorrow and am a little concerned.

    82 gs1100e FAUX Skunk
    80 gs1000s

    #2
    I never really looked, but fairly quickly as it is pulled back down via gravity...

    by the way is your bike level say on the center stand, not tilted using the side stand

    either check while its on the center stand or have someone hold it level while you check the sight glass...

    .

    Comment


      #3
      if its nice and hot, 15-20 minutes will be ample, although 10 minutes will do if you want a rough idea.
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment


        #4
        Originally posted by GateKeeper View Post
        I never really looked, but fairly quickly as it is pulled back down via gravity...

        by the way is your bike level say on the center stand, not tilted using the side stand

        either check while its on the center stand or have someone hold it level while you check the sight glass...

        .
        yeah, also if you have no centre stand make sure the bike is dead vertical, if leant over even slightly it will give a false reading
        1978 GS1085.

        Just remember, an opinion without 3.14 is just an onion!

        Comment


          #5
          I always check on the center stand. In the time it took me to come inside and write that last email, then go back out to the shop... the oil level was only showing at the "L" mark. I just started it again for a minute and turned it off... so I will wait about 15 minutes for the next check.

          BTW, if I over fill it, is there any risk or downside to that?
          82 gs1100e FAUX Skunk
          80 gs1000s

          Comment


            #6
            Originally posted by Gregory View Post
            I always check on the center stand. In the time it took me to come inside and write that last email, then go back out to the shop... the oil level was only showing at the "L" mark. I just started it again for a minute and turned it off... so I will wait about 15 minutes for the next check.

            BTW, if I over fill it, is there any risk or downside to that?
            not if you slightly overfill it. that will be ok. if you fill it to the brim then expect to get very oily and slippery haha
            1978 GS1085.

            Just remember, an opinion without 3.14 is just an onion!

            Comment


              #7
              I re-checked after 30 minutes and it was still right at the "L" mark or a smidge above it.

              The thing is, I topped it up to the full mark a week ago, and havent ridden very many miles since then.

              It doesnt smoke and there are no leaks where I park it either.

              Very strange indeed.
              82 gs1100e FAUX Skunk
              80 gs1000s

              Comment


                #8
                Originally posted by Gregory View Post
                I always check on the center stand. In the time it took me to come inside and write that last email, then go back out to the shop... the oil level was only showing at the "L" mark. I just started it again for a minute and turned it off... so I will wait about 15 minutes for the next check.

                BTW, if I over fill it, is there any risk or downside to that?
                If you're engine is hot and your oil level is at the full mark you should see oil start coming up in the sight glass within a couple of minutes. It should give it's very close to highest reading within about 10 minutes. If you're at the "L" mark and that's the highest it indicates it will probably take as much as 10 minutes to reach and see that. If it stays at "L" mark you need to bring your level up to just below that full mark.
                If you overfill it, there are relief holes in the cylinder that will blow out excess oil (at least on my 1100) and your breather will blow oil into your air box (should you have one) which may then go into your carbs and get burned with the gas.
                That oil has to go somewhere.
                Now you need to check it on the centerstand on a level surface.
                sigpic
                Steve
                "The world is a book, and those who do not travel read only one page." :cool:
                _________________
                '79 GS1000EN
                '82 GS1100EZ

                Comment


                  #9
                  Thanks guys I will definitely keep an eye on it. Maybe it wasnt warmed up enough to drip back down. I will check it in the morning and see if it is over the full mark that I filled it to this evening.

                  My concern was that whatever channels the oil comes back down into the crankcase with are somehow clogged up or something.

                  I am riding to Austin tomorrow and Chuck is going to take a look at my bike anyway so I will see what he thinks.
                  82 gs1100e FAUX Skunk
                  80 gs1000s

                  Comment


                    #10
                    Originally posted by Gregory View Post
                    Thanks guys I will definitely keep an eye on it. Maybe it wasnt warmed up enough to drip back down. I will check it in the morning and see if it is over the full mark that I filled it to this evening.

                    My concern was that whatever channels the oil comes back down into the crankcase with are somehow clogged up or something.

                    I am riding to Austin tomorrow and Chuck is going to take a look at my bike anyway so I will see what he thinks.
                    The pan should fill up, the hotter the engine the quicker it fills.
                    sigpic
                    Steve
                    "The world is a book, and those who do not travel read only one page." :cool:
                    _________________
                    '79 GS1000EN
                    '82 GS1100EZ

                    Comment


                      #11
                      The oil expands when its hot too, keep that in mind.
                      Last edited by Guest; 04-12-2013, 08:47 AM.

                      Comment


                        #12
                        My '79 'S pulls a little trick on me every now and then . Sometimes during a loong ride , and sometimes after a short one .
                        NO oil in the site glass .
                        I know it has the right amount of oil as it doesn't burn any and has no leaks .
                        Next time I check it , the level is good .
                        I don't know why it does it , and it only happens occasionally , but I freak out each time it happens .
                        The first time , I drained the oil and the volume that came out was as I'd expect if it was "full" .
                        I have erred on the side of caution and added more oil (overfilled) and oil then leaked out from behind my points plate . Freaked out again but when I got the level good , the leak stopped .
                        These old girls have some quirky quirks .

                        Cheers , Simon .
                        http://i258.photobucket.com/albums/h...esMapSimon.jpg

                        '79 GS1000S my daily ride in Aus

                        '82 (x2) GS650ET in the shed

                        Comment


                          #13
                          The checking method is in the factory service manual. Some of you guys are deviating from the correct process.

                          Engine cold
                          Bike on centerstand, and parked on flat pavement
                          Start engine and run for several seconds. Just long enough to get oil flowing throughout the engine.
                          Shut down engine and wait one min.
                          Check oil level.

                          Do NOT:
                          Check when engine is hot. Oil expands and will give you a bad reading.
                          Run engine then wait 10-20 mins. for oil to drain back.

                          Follow the Suzuki procedure and the oil level will be where they intended. Make up your own measuring method and the level will be different. It's not likely to matter a whole lot, but why not follow the procedure as dictated?
                          Last edited by Nessism; 04-12-2013, 12:40 AM.
                          Ed

                          To measure is to know.

                          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                          Comment


                            #14
                            Greg..also if you do an oil change and fill it to the F mark and start it it will read low after it settles. This is because the oil filter has to soak up some oil and the sump itself will retain some oil. I always check mine when cold and if its maybe 1 or 2 mm below the F mark i consider it good to go.
                            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                            Comment


                              #15
                              And one other thing...if it hasnt blown up by time you get to that McDonalds meet up spot...its never gonna!!! HA HA
                              MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                              1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                              NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                              I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                              Comment

                              Working...
                              X