Announcement

Collapse
No announcement yet.

resealing cases with threebond question

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #16
    quexpress..yes all three are the same as Three Bond 1184, 1194.

    The difference from these and the 1207 B is that 1207B dries hard and the others..as you will read on their tubes..is a SEMI drying sealer.
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment

      #17
      My favorite is Three Bond 1211. I've had a tube for over 10 years, but I figured it was time for a fresh one. All the shops around town had 1184, Permatex, Yamabond, but I've had such good results with this stuff, I wanted to keep using what I'm familiar with.

      Z1 sells it for $20ish.
      GS\'s since 1982: 55OMZ, 550ES, 750ET, (2) 1100ET\'s, 1100S, 1150ES. Current ride is an 83 Katana. Wifes bike is an 84 GS 1150ES

      Comment

        #18
        I use the 1207B because of the many manuls i have cruised thru it seems to be mentioned and recommended a lot...thus my thinking is that if it is specifically mentioned by the factory...good enough for me!!!
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment

          #19
          I use 1194. Latest and greatest Threebond formula for sealing cases. Great stuff. As chuck said, it remains flexible so it won't crack and leak. Better than the OEM Threeebond stuff Suzuki used 30+ years ago I think. My first 850 had an oil leak from between the case halves. Make sure you spread an even coating over 100% of the case joint area.
          Last edited by Nessism; 06-09-2013, 10:45 PM.
          Ed

          To measure is to know.

          Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

          Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

          Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

          KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

          Comment

            #20
            Ed...I SO MUCH agree on the old plastic acting hard case sealer from the 70s!!!

            Thi is the beauty of the 1207B..its dries hard but yet it isnt rock hard and plastic like when cured..Its like the perfect happy medium in a case sealer. Seals and almost never leaks, yet has that certain "flexability" to adjust for the contacting and expansion of the metals.
            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

            Comment

            Previous 1 2 template Next
            Working...
            X