.png "Powered by vBulletin")
Hey, trying to get the base gasket off but seriously baked on, anyone have any tips?
-
-
Soak some rags in water and squeeze just enough water out so they dont drip..stuff in the case around the rods so crap doesnt fall in.
Take a torch and heat directly down on the gasket material till it starts to turn reddish or otherwise will lift off easily with a putty knife. Just keep the rags wet so they dont catch fire and youll be done in just a few minutes.
Shop vac carefully around the rags before you lift them out of the case. Picks up anylittle flakes that fell onto the rags. I also keep the suction close as I lift the rags out of the holes.
And no, it wont get the cases too hot or cause any heat damages.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it. -
Do the same with the jugs and head gasket thats stuck on.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Works wonders on covers and the case surfaces as well...just sayin.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
Chuck H. lol. Good to have another set of eyes. Thanks!!!. Got a torch, h2o, rag. how could I miss such an easy solution, wow I must be slipping. T.G.Comment
-
go slow and steady..( maintain the heat trail ) peel as you heat along the stuck on gasketry. Report back how well it worked.Last edited by chuck hahn; 06-10-2013, 08:42 PM.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
One last thought...keep a spray bottle close to rewet the rags if the dry out!!!!MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
I use the wet rags, but instead of a flame, I use a electric heat gun thats made for paint stripping.Originally posted by chuck hahn View PostKomorebi-The light filtering through the trees.
That human beings can not bear too much reality, explains so much.Comment
-
Noted, and will do when I cant get the wifes Bra off.....Originally posted by chuck hahn View Post-Mark
Boston, MA
Suck Squeeze Bang Blow..
sigpic
1980 GS850G with 79 carbs.....Comment
-
Earl...I dont happen to own a heat gun, so I use what I have. Zip Strip gel in the yellow can softens them up too, but it takes FOREVER and usually has to be done a few times to get it all off. Softens from what surface it can soak into..then the rest is hard as a rock.
You have to remove whatever the Zip Strip softens then reapply for sofetning up some more.....and its messy as helll.MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550
NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.
I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.Comment
-
I've never found a way that I would consider as "easy". hehOriginally posted by chuck hahn View PostKomorebi-The light filtering through the trees.
That human beings can not bear too much reality, explains so much.Comment
Comment