Announcement

Collapse
No announcement yet.

85 550EF motor into an 82 Katana

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Lucky you. Somebody must have added that because these didn't come factory with steering dampers. If you get a chance, I still would like to see a good pic of the mounting.

    Thx!
    1982 GS550M Rebuilt Winter '12 - 550 to 673cc engine conversion.
    1989 Kawasaki ZX-7 Ninja
    2016 Ducati Scrambler Full Throttle

    Comment


      #17
      ok, give me a minute and I will post a few

      Comment


        #18
        I posted a photo album in my profile of the oil cooler, hope those help

        Comment


          #19
          Yep. Thanks!
          1982 GS550M Rebuilt Winter '12 - 550 to 673cc engine conversion.
          1989 Kawasaki ZX-7 Ninja
          2016 Ducati Scrambler Full Throttle

          Comment


            #20
            How's it coming along? I think I may have to abandon the GSX 600 motor. After pulling the 550 out and setting the 600 in place, It looks like it's going to be a bit too wide. The sprockets are off probably 12-15mm
            1982 GS550M Rebuilt Winter '12 - 550 to 673cc engine conversion.
            1989 Kawasaki ZX-7 Ninja
            2016 Ducati Scrambler Full Throttle

            Comment


              #21
              mine fit great, but found the cams bad. the exhaust cam is chewed up at the tach gear and all lobes are flat.. Going to be doing a recon on it this week and get different cams and hope it all works.. And maybe find another set of carbs since mine have been giving me fits a lot.

              to bad yours is not working out. Was looking forward to seeing your progress.

              Comment

              Working...
              X