Announcement

Collapse
No announcement yet.

Removing crankshaft

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Removing crankshaft

    How do you lock the crankshaft on an 1100 to loosen the big nut on the end?
    Tags: None
    #2
    Put it in gear and hold the brake..
    Otherwise a big impact wrench works best

    Comment

      #3
      Originally posted by SqDancerLynn1 View Post
      Put it in gear and hold the brake..
      Otherwise a big impact wrench works best
      The engine is not in the bike .

      Comment

        #4
        use an air impact wrench if you have access to one, if not use an impact driver with a socket on it.( the one you have to hit with a hammer)
        1978 GS1085.

        Just remember, an opinion without 3.14 is just an onion!

        Comment

          #5
          Originally posted by Agemax View Post
          use an air impact wrench if you have access to one, if not use an impact driver with a socket on it.( the one you have to hit with a hammer)
          No air but we do have an impact wrench .

          Comment

            #6
            Get an electric one from Harbor Freight. Cheap and oh so convenient
            1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
            1985 GS1150ES stock with 85 Red E bodywork.

            Comment

              #7
              Originally posted by chef1366 View Post
              Get an electric one from Harbor Freight. Cheap and oh so convenient
              get your ears today?

              Comment

              Previous template Next
              Working...
              X