GS1100 Starter Clutch Bolt and shoulder length? M10x?

[Guest]

Does anyone know how long the bolts are and the length/thickness of the clutch hole is?

Before I dismantle my starter clutch tomorrow, (my only fast mode of transportation), I'll go get 3 of them just in case.

Thank you

Note: Original are M8 1.25.

Type: Socket Screw
Class: 12.9
Thread density: Fine
Pitch: 1.25
Diameter: M10
Length: ?
Unthreaded length: ?
Threaded Length: ?

[postman_pat]

Bolt size is M8x16

BTW, for future reference, on Suzuki parts diagrams you'll often (not always) get a hint of the bolt size from the part number. In this case the original part no. was 09106-08006 which has since updated to 07130-0816A. The "0816" section shows it to be an M8x16.

[bwringer]

Make sure you get the grade 12.9 bolts. They'll have a black oxide finish.

Most real hardware stores will have these.

Use Loctite.

[Steve]

I am a bit confused by this:

Note: Original are M8 1.25.

Type: Socket Screw
Class: 12.9
Thread density: Fine
Pitch: 1.25
Diameter: M10
Length: ?
Unthreaded length: ?
Threaded Length: ?

If you know that the originals are M8, why are you asking about M10 bolts?

.

[c&c]

Thank's guys!

M8mm x 16mm

Why M10? Because I read that the dragsters drill and retap for M10's.
I also want to try to find bolts with an unthreaded upper.

I received my new starter clutch. I can finish my measurements.

[rapidray]

Actually, us drag race guys WELD them so they stop breaking bolts. Ray.

[bellucci]

What Ray said... I broke 3 sets in one season... If you have more trouble, Ray or I will shoot pics of where to weld...
Curt

[c&c]

What Ray said... I broke 3 sets in one season... If you have more trouble, Ray or I will shoot pics of where to weld...
Curt

Offer accepted.

Merci!