GOVERNOR ASSY bolt , need help!!

[Guest]

help needed , I have a 82 1100g and the bolt that hold the GOVERNOR ASSY to the crank ,will not move, what do I need to do , to get it out with out big ordeal!??

[Steve]

As soon as someone figures out what you are calling a "governor assembly", we might be able to help you.

.

[cowboyup3371]

Almost sounds like the one holding the rotor possibly?

[Steve]

I just looked at the parts fiche, there is nothing with that description.

.

[tbirdhd]

need to look again ,GOVERNOR ASSY
33120-31310 signal generator

[Nessism]

Centrifugal advance unit?

What about heating the screw?

[tbirdhd]

I thought about that but would not want to over heat the seals

[Nessism]

What seals?

[tbirdhd]

I was thinking about the CRANK SFT R OIL or the case seal

[Nessism]

It would take a LOT of heat to heat up the entire crankshaft enough to damage a seal that regularly sees 300F.

[bwringer]

That bolt was installed at the factory with a pretty stout thread locking compound. You MUST get it hot before removing it. And no, you don't need to get it red-hot -- just hot enough to soften the thread locking compound. You don't want to screw up the hardening on the bolt, so don't go overboard.

Also, use a HIGH QUALITY hex bit with a socket handle to remove the bolt. You will not be able to budge it with an "L" key, or with any of the cheap crap from Walmart.

I generally use an air impact on a lower setting with a quality impact bit, but impact-rated bits are pretty rare (harbor Freight sells a very nice set, believe it or not).

Of course, you'll also want to make sure the engine can't turn backwards. Put it in gear and step on the rear brake.

[tbirdhd]

thanks for the info, guys, this is first one I cant get out,

[Steve]

need to look again ,GOVERNOR ASSY
33120-31310 signal generator

Sorry, I must be running on "extra ignorant" tonight.

I plugged that part number into the parts finder at Alpha Sports. It came back as fitting '83 and '84 1100G, but not '82.

According to them, it is also not called a "governor".

33120-31310 ROTOR, SIGNAL 1 MODEL D

Sorry for the side-track, I will not derail your thead any further.

.

[tbirdhd]

Thats kool , Steve some of the site all call it some thing different, the suzuki shop in gainesville Fl shows for 82 83 1100g , would it be a later 82, , and ny help is all way welcomed !!