I thought I may have a cylinder that's weak so I did a compression test and was surprised to find that all cylinders are coming in at between 145 to 150. When I purchased the bike it was more like 125 to 130 max. If I understand this correctly then I can rule out cylinder and valve issues. No smoke from exhaust at idle nor when revved up and back down.
Some history: All valves have been adjusted, carbs were rebuilt by a GSR member and new intake boot O-rings were installed all before the power loss and it ran great for a couple months, pulled very hard from just slight throttle opening all the way up to WOT, then bam... Sudden loss in power like a cylinder cut out. I replaced the coils and plug caps. Things improved but it still has a perceived lose in power. Idle is fairly good and steady though. Fairly new stock NGK plugs and they look clean with a slight grey tone. No black soot and not all white. Petcock is still original but I don't see gas in the vacuum line. Charging system working with about 13.8V at idle. Rises to about 14.2V when revved up. I did notice that, for a brief time, the #3 exhaust pipe didn't seem to get as hot as the others and then it came back.
I'm thinking to check the sync again but I'm afraid that I'll need to rebuild the carbs as well.
Any ideas on where I should go next?
Comment