Valve adjusting headaches

[exdirtbiker]

Here is the spec sheet:
http://www.webcamshafts.com/pages/mo...65_000663.html

Thanks again TeamDar !
The sheet says " vale lash .006" not .004-.006.
should I go .005 -.007 ?

Intake
Exhaust
Valve Lash (Inch):
.006"
.006"

Valve Lift (Inch):
0.365
0.365
Valve Lift (mm):
9.27
9.27
Advertised Duration:
286°
286°
Duration @ 0.050":
245°
245°
Lobe Center:
105°
105°

Intake
Opens
17.5°
Before
TDC
Exhaust
Opens
47.5°
Before
BDC
Intake
Closes
47.5°
After
BDC
Exhaust
Closes
17.5°
After
TDC
Valve Timing Is Checked With Zero Valve Lash
@ 0.050 Inches Of Valve Lift.
Print Timing Card Information
Close Timing Card Information
Web Cam Inc. products are not intended for use on pollution controlled vehicles.
Copyright © 2000 - 2014, Web Cam Inc. ®, All rights reserved.
Open Monday - Friday, 8:00am - 4:30pm Pacific

[TeamDar]

I would shoot for .006" but I wouldn't go any larger. How about .005"-.006"?

[Steve]

I would shoot for .006" but I wouldn't go any larger. How about .005"-.006"?

Since the shims come in increments of 0.05mm (approx 0.002"), he will need to have a 0.002" range.

Which would be better, 0.005-0.007" or 0.004-0.006"?

.

[TeamDar]

How about .004"-.006" intake and .005"-.007" exhaust. These are mild cams that can use stock valve springs. Dar