.png "Powered by vBulletin")
Engine mounts. ..
-
My Motorcycles:
22 Kawasaki Z900 RS (Candy Tone Blue)
22 BMW K1600GT (Probably been to a town near you)
82 1100e Drag Bike (needs race engine)
81 1100e Street Bike (with race engine)
79 1000e (all original)
82 850g (all original)
80 KZ 650F (needs restored) -
Brake torque arm. Chain tensioners...
I did know you could attach pictures like this. I always thought you had to go through photo bucket...My Motorcycles:
22 Kawasaki Z900 RS (Candy Tone Blue)
22 BMW K1600GT (Probably been to a town near you)
82 1100e Drag Bike (needs race engine)
81 1100e Street Bike (with race engine)
79 1000e (all original)
82 850g (all original)
80 KZ 650F (needs restored)Comment
-
The machine on the lift...My Motorcycles:
22 Kawasaki Z900 RS (Candy Tone Blue)
22 BMW K1600GT (Probably been to a town near you)
82 1100e Drag Bike (needs race engine)
81 1100e Street Bike (with race engine)
79 1000e (all original)
82 850g (all original)
80 KZ 650F (needs restored)Comment
-
Wow, not much metal there, how long have they held up?Originally posted by storm 64 View PostComment
-
I made the engine mounts about 15,000 miles ago. They are made out of stainless steel. They are .25 wide. Triangles are structurally strong...Originally posted by tkent02 View PostMy Motorcycles:
22 Kawasaki Z900 RS (Candy Tone Blue)
22 BMW K1600GT (Probably been to a town near you)
82 1100e Drag Bike (needs race engine)
81 1100e Street Bike (with race engine)
79 1000e (all original)
82 850g (all original)
80 KZ 650F (needs restored)Comment
-
I would be interested in several of the brake stays. Can you make them different lengths and alter the end pieces easily?
The tensioners look good as well but isn't the axle castle nut supposed to be on the right side of the bike?
The upper rear motor mounts look nice but I also would prefer them to just be solid pieces. Do you make any of those?Comment
-
I would surely be interested in a set for a '79.Any interest in motor mounts to put GS 1000 engines in GS 750 frames???
I have an '82 750 I would like to 1000 also if mounts were available?Comment
-
Originally posted by storm 64 View Post
wow, looking forward to seeing this one in person. Very nice, bet it goes 'half decent'
Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533Comment
-
Thanks Rob, but I don't think I'm riding the 1100 to Cranbrook. Probably the BMW or maybe the 850Originally posted by azr View Postwow, looking forward to seeing this one in person. Very nice, bet it goes 'half decent'My Motorcycles:
22 Kawasaki Z900 RS (Candy Tone Blue)
22 BMW K1600GT (Probably been to a town near you)
82 1100e Drag Bike (needs race engine)
81 1100e Street Bike (with race engine)
79 1000e (all original)
82 850g (all original)
80 KZ 650F (needs restored)Comment
-
Much better choices for touring no doubt. Well the 850 looks just as tidy!Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533Comment
Comment