Cylinder head studs

[verticalroll]

studs

I would agree with the length. What engine model did they come off of maybe I can order the part? How much for them?

[Nessism]

I would agree with the length. What engine model did they come off of maybe I can order the part? How much for them?

These studs came from a GS1000. As I already said earlier in this thread, the studs are the same as the 750 studs; same part number. Please go to the link I posted and check the part numbers for yourself. Check both the 750 and the 1000. As mentioned also, these parts are not discontinued so you can still order new.

If you want to discuss obtaining these, send me a PM.

[verticalroll]

Thanks for the help the GS 1000 only came out with GS100 typo error that is why I did not understand. I will call them today and order them thanks again.

[verticalroll]

Cylinder head Gaskets

Hey all why is the gasket for the top of the cylinder/valve train cost 145.00 bucks. I called a suzuki dealer in Maine and they have the #3 stud as part number 09108-10028 not -09108-10112 what gives?

[Nessism]

http://www.ebay.com/itm/Suzuki-GS750-1977-79-nos-engine-gasket-set-p-n-11400-45310-/201055205423?pt=Motorcycles_Parts_Accessories&hash=item2ecfd2f82f&vxp=mtr

Regarding that stud, you didn't do what I suggested, namely go to the parts fishe and look at the supercession chain. All the following part numbers interchange...

Part# 09108-10112
supersedes: 09108-10020, 09108-10028, 09108-10071

[verticalroll]

studs

Thanks for the help

[poppadre]

Hey guys. Just want to clarify here since I'm going to replace my studs that were over torqued. The 4 outermost studs (http://www.suzukipart.com/oemparts/p...0027/stud-bolt) are the same as the innermost studs? Even though they look different sizes when in the case?