Announcement

Collapse
No announcement yet.

How to remove front left cover - front sprocket cover

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    How to remove front left cover - front sprocket cover

    Hello Dear,

    I need to change sprockets and drive chain on my bike.

    On front left cover is connected clutch cable.

    How to remove cover?

    Do I need to remove clutch cable or just take it out together?
    There is a pict in att.

    Bike is GS550 Katana 1983.

    Thanks in advance
    Goran

    #2
    Cover comes off with cable attached. Look at your service manual. If you don't have one you might want to look up "basscliff" and download one. Check my signature for the Newbie Mistakes thread too so you can be aware of some common pitfalls with GS bikes.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Tip for this job: leave the chain on until you have undone the front sprocket nut. Stick the bike in gear and put the rear brake on to hold the output shaft still while you undo the nut.
      79 GS1000S
      79 GS1000S (another one)
      80 GSX750
      80 GS550
      80 CB650 cafe racer
      75 PC50 - the one with OHV and pedals...
      75 TS100 - being ridden (suicidally) by my father

      Comment


        #4
        Hi,

        Thanks for the tips, I successfully take it off.

        Comment

        Working...
        X