GS1100 G valve clearance

[Guest]

I have searched and can not find the valve clearance specs for this bike. I found it for other GS's. So does anyone know? I already measured all my clearances and recorded the shim sizes but am stuck now.

[Nessism]

Here is a link to the factory Suzuki service manual. http://www.mtsac.edu/~cliff/storage/...L-K_Manual.pdf

Edit: checked your posting history and Cliff already provided you with a link to his site, and the manual (and a valve adjust tutorial). Apparently you forgot so here it is again...http://www.thegsresources.com/_forum...d.php?t=217591

[1948man]

.03mm-.08mm or /0012"-.0032" for all valves. Might want to check the above link at section 2 page 5 to make sure I'm thinking right.

[Scratcher09]

I have tried that link before but my ipad will not open it. It loads for about a minute and then just closes. I assume I need to be on a regular computer to open it.

Thanks 1948man.

[Steve]

While you are in the middle of this project, feel free to take advantage of the invitation in my signature.

.

[woodsrider250]

Isn't that a rocker arm engine?

[Nessism]

Isn't that a rocker arm engine?

Nope. Shims.

[Steve]

Isn't that a rocker arm engine?

No, all the GS shafties (except the 450GA) are 8-valve engines and require shims.

.