Mind you my bike is the sublime GS 550 and not a ***** replacement therapy.
Announcement
Collapse
No announcement yet.
Chain just broke
Collapse
X
-
JEEPRUSTY
Golly gee gosh. I could never do it without the sprocket cover off on mine.
Mind you my bike is the sublime GS 550 and not a ***** replacement therapy.
-
Originally posted by Rob S. View PostNow, for the technical opinions. Chef is sending me a 96-link 630 chain (I know, I should go 530). Being that the one I just left on the side of the road was a 96-link 630, I was thinking I could install the replacement without removing the foot peg, shift linkage and front sprocket cover.
Thoughts?
Comment
-
Originally posted by Big T View PostAAA Plus membership, up to 100 miles. You won't always be 3 miles from home. Worth every penny
I kept thinking I would have trouble getting her up the driveway into the garage, which neighbors or nephews could I call, but that was no problem. Now if I had a V-Max, this never would've happened.1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red
2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.
Comment
-
Originally posted by Rob S. View PostNow if I had common sense, this never would've happened.
Fixed .
Comment
-
JEEPRUSTY
Chain regardless of mismatch will wear in. It will have accelerated wear but there is no voodoo in parts re-mating.
Comment
-
Originally posted by dorkburger View PostThat sucks, but I'm glad you're ok. A guy I know had a clip type master link come apart in the Holland tunnel. Talk about excitement......Regarding the chain- my first GS came to me with an el cheapo non o ring chain. I had to adjust it weekly. It pays to get a good chain.
Comment
-
Originally posted by Rob S. View PostYou're the most negative guy on here. But...I have learned something from you ...
He can be described as "brutally honest".
You may have learned something from him, hopefully it was something about adjusting chain tension.
Now, you want to learn a little bit more?
Chains don't stretch.
There is nothing in the metal that allows it to stretch, and there is not enough power in our bike engines to cause any stretch. The reason adjustment becomes necessary is because excess tension will wear out the holes around the pins. Where does this excess tension come from? A mis-adjusted chain.
There are three points of interest regarding proper chain adjustment: 1. The transmission output shaft (the front sprocket). 2. The swingarm pivot. 3. The rear axle. Simple trigonometry will tell you that the distance from the output shaft to the rear axle is greatest when the three are in a straight line. If you adjust your chain tension to your snug preferences when the three are NOT in a line, tension will increase considerably when you sit on the bike and line up the three points. This just might be why your chain failed.
To find the ideal amount of slack for your chain, find a way to line up the three points. Use a ratchet strap around the top of the bike and through the wheel to pull it up or you can make it easier by removing the shocks and put some blocks under the wheel to raise it to the proper height. Now you can adjust your chain to your snug preferences, knowing that this is the tightest it will ever be. Put the bike back to "normal". Put the shocks back on, release the ratchet straps, whatever. Put it on the centerstand, if it's not there already, and measure your slack. Use THAT as your proper amount of slack.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35644
- Torrance, CA
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Originally posted by Rob S. View PostNow, for the technical opinions. Chef is sending me a 96-link 630 chain (I know, I should go 530). Being that the one I just left on the side of the road was a 96-link 630, I was thinking I could install the replacement without removing the foot peg, shift linkage and front sprocket cover.
Thoughts?
Comment
-
Originally posted by tkent02 View PostRemember when your mom wouldn't let you have that tricyle whe you were eleven?
She knew. Quit while you're ahead.
My chain and sprockets came with this used motorcycle six months ago. So, yeah, I guess you could say the chain was used. The sprockets were not mismatched, but you always assume the negative.
Why don't we call it even and we both quit?1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red
2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.
Comment
-
Originally posted by tkent02 View PostFixed .
Because that is what tkent02 has just done.1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red
2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.
Comment
-
Originally posted by tkent02 View PostYeah, I know I'm arrogant and negative.
BTW, I'm not the only one who feels this way about you.
Now, I apologize for everything negative I've said about you.
Can we let it drop and be friends, or will you answer with another snide comment?1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red
2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.
Comment
-
630 Chain
Originally posted by Nessism View Post
As for OP, glad you're okay.
Back to the chain...I just received a 630 from MrBill. We couldn't get my "T's" front sprocket hub nut loosened and my 630 was in terrible shape so he offered me his relatively new 630 chain (that was't going back on his bike).
Anyway, I heard mention of this link ring and remembered Bill said the open part of the link should be pointed towards the rear tire as it may come off if put in the wrong direction.
Thanks to Bill, I now know how to adjust my chain accordingly (based on the graph too)
EdGS750TZ V&H/4-1, Progressive Shocks, Rebuilt MC/braided line, Tarozzi Stabilizer[Seq#2312]
GS750TZ Parts Bike [Seq#6036]
GSX-R750Y (Sold)
my opinion shouldn't be taken as gospel or in any way that would lead you to believe otherwise (30Sep2021)
Comment
Comment