.png "Powered by vBulletin")
I want to pull my front sprocket out 3/8 of an inch and wonder if there is a place that makes sprockets that have the design for doing this.
Andy
Andy
-
-
Are you relocating the rear sprocket too? -
JT Sprockets or PBI would have offset sprockets.
Are you going with a wider rear wheel?
2@ \'78 GS1000Comment
-
Yes there are offset sprockets for some of the GS models you can get them in 1/4'' and 3/8'' offset. If your sprocket uses the same spline as the GS1100 16v motor then yes for sure.My stable
84 GSX1100EFG-10.62 @ 125 mph 64'' W/B.
85 GS1150-9.72@146mph stock W/B.
88 GSXR1100-dragbike 9.18@139.92mph/5.68@118mph.
98 Bandit 1200-9.38@146mph/6.02@121mph.
90 Suzuki GS 1425cc FBG Pro Stock chassis 5.42@124mph
06 GSXR750 10.44@135mph
00 Honda elite 80 pit bikeComment
-
And 5/8" beyond that you need an outboard bearing.
Dare I pull out and old link? 1/4 is for 3.5" wheels, 3/8 for 4.5" wheels and 5/8" for 5.5" wheelsLast edited by posplayr; 05-13-2014, 09:32 PM.Comment
Comment