.png "Powered by vBulletin")
Damn! I should have read the label more carefully. I've been running Rotella 15w40 with no problem. Changed the oil today, thinking I was buying the same stuff. Turns out I bought Rotella 10w30. Took it for a spin, and the clutch slips a little under hard acceleration. There went 15 bucks for nothin!
-
https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E Project -
nope...
don't think one has to do with the other.. -
confident
Maybe I just got a little more "confident" with the throttle today. I'll check my cable adjustments as that is something I haven't even looked at yet.https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
-
Replacing the clutch springs might help.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-ResurrectionComment
-
not slipping
Seems like a cable adjustment did the trick. PO had no play in the cable at all and the lever was hanging up a bit against the perch. I think it was the hanging up that was causing the majority of the problem.https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
1983 GS750ED-Horsetraded for the Ironhead
1981 HD XLH
Drew's 850 L Restoration
Drew's 83 750E ProjectComment
Comment