Announcement

Collapse
No announcement yet.

850L Shifting sounds

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    850L Shifting sounds

    Hi,
    Please describe your shifting noise and feel on your GS850.
    Father in-law gave me his 82' 850L w/ 26k miles on it, and the shifting seems pretty loud. It tends to be more clanky/notchy then I remember from other bikes I have had. With the clutch lever pulled back often the bike will lurch just a tiny bit for a short amount of time when shifting. Just changed the oil to Shell 15w-40 Syn T6 and it seemed to improve a little.
    Just trying to figure if the bike is worth putting $$$ into. The local dealer around here gets $100/hr

    Thank you,
    Andy
    Last edited by Guest; 06-14-2014, 09:26 AM.

    #2
    Originally posted by Mr.Mom View Post
    Hi,
    Please describe your shifting noise and feel on your GS850.
    Father in-law gave me his 82' 850L w/ 26k miles on it, and the shifting seems pretty loud. It tends to be more clanky/notchy then I remember from other bikes I have had. With the clutch lever pulled back often the bike will lurch just a tiny bit for a short amount of time when shifting. Just changed the oil to Shell 5w-40 Syn T6 and it seemed to improve a little.
    Just trying to figure if the bike is worth putting $$$ into. The local dealer around here gets $100/hr

    Thank you,
    Andy
    Hoping you meant Shell 15W40 Rotella?

    Comment


      #3
      If you are paying someone else to fix it, no old bike is going to be worth putting money into. Most bike shops won't touch an older bike anyway, nor should they. If you enjoy doing the work yourself, it's probably a fairly easy fix. An '82 with 26,000 miles has sat a lot, it will need quite a few of these easy fixes to be safe and reliable, and quite a bit of money in parts and tools if you don't have them.
      Those of us who restore old bikes generally figure $1000 to get one safely on the road again after a long time sitting, not including cosmetics. Tires, cables, some electrical parts, a few bearings and oil seals, it all adds up. Sometimes less, but sometimes more. Quite a bit of time and effort too.
      An 850 should shift like butter. Very slight clunk from neutral into first, almost silent after that.
      http://img.photobucket.com/albums/v5...tatesMap-1.jpg

      Life is too short to ride an L.

      Comment


        #4
        exactly

        I just finished getting the same year/model roadworthy. Everything tkent said is correct. Do it yourself, you might find it fun and therapeutic. I know I did!
        https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
        1983 GS750ED-Horsetraded for the Ironhead
        1981 HD XLH

        Drew's 850 L Restoration

        Drew's 83 750E Project

        Comment


          #5
          Sounds like you have a clutch slightly out of adjustment. That is the lurch when you put it in gear.

          By the way, in my personal experience, 30000 miles is about when the transmission on an 850G should be nicely broken in. Low mileage examples don't shift quite as nicely. I have one with 10,000 miles, and one with nearly 50,000 miles, and the one with the higher miles is far and away the better ride, because the engine is a little smoother, and the transmission is quite a bit smoother.
          Last edited by 850 Combat; 06-14-2014, 02:52 PM.
          sigpic Too old, too many bikes, too many cars, too many things

          Comment


            #6
            Family member / motorcycle guru agreed to check the carb/valves etc. ! He is a lot less expensive than $100/hour.

            I am a little intimidated by the heft of the bike. It's a bit heavier than I anticipated. Not sure my small frame (120 lbs.) can handle it.

            Comment


              #7
              leaning

              Originally posted by Mr.Mom View Post
              Family member / motorcycle guru agreed to check the carb/valves etc. ! He is a lot less expensive than $100/hour.

              I am a little intimidated by the heft of the bike. It's a bit heavier than I anticipated. Not sure my small frame (120 lbs.) can handle it.
              Just don't lean over too far when you're not moving, you'll be fine.
              https://drive.google.com/open?id=0B9zH8w8Civs8ejBJWjdvYi1LNTg&resourcekey=0-hlJp0Yc4K_VN9g7Jyy4KQg&authuser=fussbucket_1%40msn.com&usp=drive_fs
              1983 GS750ED-Horsetraded for the Ironhead
              1981 HD XLH

              Drew's 850 L Restoration

              Drew's 83 750E Project

              Comment

              Working...
              X